Filter
Top Products
Unsatisfactory results
Fault Possible cause and solution
The consistency of
the milk froth is
unsatisfactory.
The milk temperature is too high. Good milk froth can only
be achieved when cold milk (below 55°F/13 °C) is used.
^
Check the temperature of the milk.
The milk pipework is blocked.
^
Clean the main dispenser with integrated cappuccinatore
and the milk pipework with the cleaning brush.
The coffee grinder
makes a louder
noise than usual.
The coffee bean container has become empty during the
grinding process.
^ Fill the coffee bean container with fresh beans.
There may be stones in among the coffee beans.
^ Turn the coffee system off immediately. Contact Miele.
Espresso or coffee
flows into the cup
too quickly.
The grind level is too coarse.
^ Set the grinder to a finer setting (see "Setting the coffee
grinder").
Espresso or coffee
flows too slowly
into the cup.
The grind level is too fine.
^
Set the grinder to a coarser setting (see "Setting the coffee
grinder").
The coffee or
espresso is not hot
enough.
The cup has not been pre-heated.
The brewing temperature is set too low.
^
Set a higher brewing temperature (see "Brewing
temperature").
The brew unit filters are blocked.
^
Remove and clean the brew unit (see "Cleaning and care –
Brew unit").
^
Degrease the brew unit (see "Cleaning and care - Brew
unit").
Frequently Asked Questions
67