Filter
Top Products
All electrical work should be
performed by a qualified electrician
in strict accordance with national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous.
Verify that the voltage, load and circuit
rating information found on the data
plate match the household electrical
supply. This data must match to
prevent damage to the coffee system. If
in doubt, consult a licensed electrician.
The data plate can be found behind the
drip tray inside the coffee system.
The appliance is supplied with a power
cable ready for connection to an AC
120 V 60 Hz supply.
Connect the coffee system only to a
properly installed outlet with grounding
contact.
Fuse rating must be at least 15 A.
The socket should be next to the
appliance and easily accessible.
To reduce the risk of injury, do not
drape cord over the counter top or
table top where it can be pulled on by
children or tripped over unintentionally.
Do not connect the appliance to a
power inverter or directly to power
produced outside of the normal
electrical grid (i.e. direct solar or wind
power source).
Direct connection to such power
sources can cause power surges and
tripped breakers when the appliance is
turned on, and could damage the
appliance.
Do not connect the appliance to energy
saving plugs or outlets. The reduction
of power to the appliance caused by
these devices will cause the appliance
to run hot and may damage it and/or
shorten its usable life.
Do not operate any appliance with a
damaged cord or plug. Contact Miele
Technical Service.
h it up through the opening at the back
of the machine.
If there is any question concerning
the electrical connection of this
appliance to your power supply,
please consult a licensed electrician
or contact Miele’s Technical Service
Department.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
Electrical connection
75