Filter
Top Products
Fault Possible cause and solution
The preparation of
coffee drinks is
cancelled
repeatedly and
the message "Fill
bean container"
appears.
This is not a fault.
The brew unit does not sense the ground coffee.
With particular types of coffee, it can happen that too little
coffee is ground or the ground coffee is too fine. Usually the
grinding – fine and the ground coffee quantity – are set too
low.
^
Confirm the message with OK.
Tip: If the coffee is too strong for you or it tastes bitter, try
another type of bean.
If the message appears during the preparation of all coffee
specialties:
^ Set the grinder to a coarser setting (see "Setting the coffee
grinder").
^ Check the settings for the grinding quantity for all coffee
specialties (see "Setting the coffee grinder"). If necessary,
select a larger quantity to grind.
Also consider any changed drinks in "Profiles" {.
If the message only appears during the preparation of
selected coffee specialties:
^
Check the settings for the grinding quantity for this coffee
specialty (see "Setting the coffee grinder"). Select a larger
quantity to grind.
^
If necessary, you should also set the grinder to a coarser
setting.
Drink preparation
begins even
though no button
was touched.
Condensate may have built up on the control panel and
accidentally started the process.
^
Wipe any condensate off with a soft cloth.
Frequently Asked Questions
64