Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
12
T
o avoid damaging the range, make sure that the connection data
(voltage and frequency) on the data plate correspond to the
building's power supply before connecting the appliance.
When in doubt, consult a qualified electrician.
Do not use a power strip or e
xtension cord to connect the range
to electricity. These are a fire hazard and do not guarantee the
required level of appliance safety.
This applianc
e must not be installed and operated in mobile
installations (e.g. on a ship).
Danger of electric shock!
Under no ci
rcumstances open the outer casing of the appliance.
Do not r
epair or replace any part of the appliance unless
specifically recommended in the operating instructions. All other
servicing should be referred to a qualified technician.
Defective co
mponents should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.
During
installation, maintenance and repair work, e.g. if the oven
lighting is broken (see "Frequently asked questions"), the range must
be completely disconnected from the household electricity supply.
The gas supply must be shut off. Ensure that this is the case by:
– removing the fuse,
– "tripping" the circuit breaker, or
– unplugging the unit. Pull the plug not the cord.
– Shut off the gas supply and, if necessary, disconnect the range
fr
om the gas line. Installation and maintenance of the gas
connection must be performed by qualified installers, service
agencies or gas providers.