Filter
Top Products
Frequently asked questions
131
Problem Possible cause and solution
The oven does not heat
up.
Demo mode is activated.
T
he oven can be operated but will not heat up.
Deactivat
e Demo mode (see "Settings –
Showroom Program").
Power Failure - Program
Canceled appears in the
display
.
There has been a power failure which has caused the
cu
rrent cooking process to stop.
T
urn the oven off and then back on again.
R
estart the cooking process.
12:00 appears in the
displ
ay.
The power supply was interrupted for longer than 200
hours.
Rese
t the date and time.
Maximum operating duration
reached appears in the
display
.
The oven was operated for an unusually long period
o
f time. The Safety cut-out feature has been
activated.
Confirm with OK. Clear the message Program
Finished by selecting "Back".
The oven is now ready to use.
Fault XX appears in
t
he display.
A fault has occurred that you cannot resolve.
Contact Mie
le Technical Service.
Door not locked appears
in
the display.
The Self Cleaning program door lock is not locking.
T
urn the oven off and then back on again. Then
restart the Self Clean program.
If the message appears again, contact Miele
T
echnical Service.
Door not released appears
in
the display.
The door lock for the Self Clean program will not
d
eactivate.
T
urn the oven off and then back on again.
I
f the door lock still does not deactivate itself,
contact Miele.
No signal to roast probe.
Reposition roast probe in the
oven. appears in the
display
.
The wireless roast probe is not recognized.
Repositi
on the probe in the food.
If the oven still does not recognize the wireless roast
pr
obe, it may be faulty. A replacement roast probe
can be ordered from Miele.