Filter
Top Products
Moisture Plus
68
Cooking with the Moisture
Plus function
It is normal for condensation to form
on
the inside of the door during steam
injection. This will dissipate during the
course of the cooking program.
P
repare the food and place in the
oven if no preheating is required.
Select Operating Modes.
Selec
t Moisture Plus .
The default temperature (350°F/160°C)
is displayed
The oven heating, lighting and cooling
fan will turn on.
Setting the temperature
Set the r
equired temperature.
Confirm with OK.
Setting the number of steam bursts
The oven will draw in water
aut
omatically from the water supply
and then release the steam at the
specified times. You will hear some
pumping noises during the water
intake process.
If you would lik
e a burst of steam to
be automatically injected into the
oven after the heating-up phase,
select Automatic burst of steam.
If you would lik
e to inject one or more
bursts of steam manually at specific
times, select 1 Burst of steam, 2 Bursts
of steam or 3 Bursts of steam.
Timing the bursts of steam
This option will only appear in the
display aft
er you have selected 1, 2 or
3 bursts of steam.
Tip: If you have selec
ted more than one
burst of steam, the second burst should
be released at least 10 minutes after
starting the program.
Manual bursts of steam
T
o inject the bursts of steam yourself,
select Manual.
Time-controlled steam
If you want t
o set a time for injecting
the bursts of steam, select Time
Controlled.
Set the desir
ed time for each burst of
steam. The oven will then release the
steam at the specified times. The
time begins counting down when the
program is started.
Co
nfirm by touching OK.