Mitsubishi Electronics MR-E62S Refrigerator User Manual


 
10
TroubleshootingBefore Use Operation Cleaning
Note
z
When a control panel button is pressed, the display lights up. Note that the corresponding operation is not performed
yet. Press the button that you want to operate after lighting up the display.
z
After a (refrigerator, freezer or ice making compartment) door is closed, the ECO GUIDE and ECO MODE displays
light up for about 30 seconds.
z
To return the compartment selection, temperature control, fast cooling and supercool freezing settings to their initial
condition (at the time of purchase), for example if you have forgotten the settings
X
Page 19
To save power, the control panel display turns off if there is no operation for about 30 seconds.
(The settings are saved.)
To check the setting (or operation) status, press a control panel button to light up the display.
* This display example may differ from the actual display.
Using the Control Panel
Switches the displayed compartment
Sets the temperature of the displayed compartment
The "ECO Level" of the refrigerator is
indicated by the number of leaves.
The higher the number of leaves, the
better the power-saving performance.
X
Page 18
The screen display changes each time the
button is pressed.
Refrigerator, freezer, and
vegetable compartments
X
Page 12
Fast cooling (QCK)
X
Page 12
Versa compartment
X
Page 14
Refrigerator, freezer, and
vegetable compartments: ..."M"
Ice making compartment: ..."REG"
Versa compartment: ..........."SOFT FZR" • "M"
Use when you want to save power.
When the temperature inside the
refrigerator is stable, the power-saving
operation is performed automatically.
(Operates with the freezer compartment
temperature set slightly higher.)
X
Page 18
Initial settings (at time of purchase)
ECO MODE
GUIDE