Filter
Top Products
4
TroubleshootingBefore Use Operation Cleaning
Install level
Use the hand-holds Use protective
material
Prohibited
Never do
Never touch
Never attempt to
disassemble, repair
or alter
Never expose to
water
Never touch with
wet hands
Be sure to follow
the instructions
Be sure to remove
the power plug
from the socket
The danger and degree of
danger caused by improper
handling are categorized
and described with the
following indicators.
Meaning of symbols.
If an abnormality or
malfunction occurs,
stop operation
immediately and contact
the retail store where you
purchased the refrigerator
or a Mitsubishi Electric
Maintenance Service
or Customer Service
representative.
Leave space
Service Call
Remove dust
Prevent tipping
Only use an outlet that meets the specifi ed rating.
Cord facing down
Water prohibited
Remove plug
Do not use
Prohibited
Prohibited
Wet hands
prohibited
Installation and transportation
Anchor the
refrigerator to a
strong and level fl oor
by adjusting the
adjustable supports.
Otherwise, the
refrigerator may move
and cause injury.
X
Pages 6 - 7
Use the
transportation
hand-holds when
transporting the
refrigerator.
Holding other parts may
result in injury.
X
Page 30
Be careful not to
damage the fl oor
or injure yourself
when moving the
refrigerator.
Lay a protective sheet on
the fl oor and move the
refrigerator slowly.
Do not pack
in excessive
amounts of food.
Do not pull the
shelves with
excessive force.
Food may fall out and
cause injury.
Installation
Leave space around the refrigerator.
If refrigerant leaks, it
may accumulate and
catch fi re or explode.
X
Page 6
Anchor the refrigerator to a strong
wall or post to protect against damage
during earthquakes.
The refrigerator may tip
over and cause injury.
X
Pages 6 - 7
Do not install the refrigerator outdoors
or in places exposed to water or
excessive humidity.
Water may cause
insulation failure,
resulting in an electric
shock or fi re.
X
Page 6
Use a dedicated outlet for the power
supply that meets the rating specifi ed
on the rating label. (The rating label
is located on the door-liner of the
refrigerator compartment.)
Using extension cords and
plugging too many leads
into a single socket can
cause heat build-up or fi re.
X
Page 6
If the power cord is damaged, call our MITSUBISHI
SERVICE CENTER for the replacement.
If the power cord is damaged, purchase
a new cord from MITSUBISHI SERVICE
CENTER. Make sure that the power
cord is designed for this model.
X
Page 6
Insert the power plug with the cord
facing down, and fully insert
the prongs.
Inserting the plug upside-
down places stress on the
cord and may cause heat
generation or fi re.
Power and power plug
Remove the power plug before
cleaning.
Otherwise an electric
shock or injury may
result.
Do not crush the power plug with the rear
of the refrigerator.
Do not damage the power cord.
Pressing, folding, bundling
or placing heavy objects on
the power cord may cause an
electric shock or fi re.
Do not use damaged cords or plugs, or
loose sockets.
Doing so may cause an
electric shock or fi re.
Do not pull the cord when unplugging
the power plug.
The cord may be
damaged, resulting in
electric shock or fi re.
Remove dust periodically from the
power plug.
Dust may cause
insulation failure,
resulting in fi re.
Do not plug in or out the power plug with
wet hands.
Doing so may cause an
electric shock.
Improper handling can result
in death or serious injury.
Warning
Improper handling can result
in personal injury or damage
to your house, household
furnishings, etc.
Caution
Safety Precautions