Mitsubishi Electronics MR-E62S Refrigerator User Manual


 
18
TroubleshootingBefore Use Operation Cleaning
Note
z
lights up when ECO mode is set and the power-saving operation is started.
z
Even when ECO mode is set, the power-saving operation may stop and
may go off, for example when the doors
are frequently opened, after defrosting, or during fast cooling. (After the freezer compartment is suffi ciently cooled and
the temperature is stable, the power-saving operation is restarted automatically.)
Set ECO MODE
When the temperature inside the refrigerator is stable, the
power-saving operation is performed automatically. This is not
set initially.
Use a higher temperature setting
When a higher temperature setting is used in each compartment,
the power consumption is reduced. We also recommend setting
the versa compartment to soft freezing.
Set the anti-condensation heater to low
When the humidity is low, setting the anti-condensation heater
to low helps save power.
X
Page 30
Do not open the doors more than necessary,
and close them as soon as possible
If doors are opened frequently or are kept open for a long
time, cold air escapes from the refrigerator and more
power is consumed.
z
Even when a door is open only slightly, it can cause frost
or condensation, reduce the cooling performance, or
generate water drips.
Arrange the food carefully
If too much food is packed inside the refrigerator or the
air outlets are blocked, the fl ow of cold air is impaired,
which inhibits the cooling of the food inside.
Be careful not to
trap items such as
food, plastic bags,
or the power cord in
the doors.
Wait until hot food has
cooled before placing
it inside. (Hot food can
be put in when using
supercool freezing!)
Keep a gap
between food
How can I increase the ECO level? (Tips for power saving)
* Display example
1
Press for about 3 seconds.
(Until the buzzer sounds twice.)
To cancel
Level 1 Level 2 Level 3
The ECO Level of the previous 24 hours is determined by factors such as the temperature
settings of the compartments and the frequency of opening the doors, and is indicated by the
number of leaves.
Performs the power-saving operation automatically when the temperature inside the
refrigerator is stable.
z
The ECO Level is indicated in 4 levels from 0 to 3.
z
The better the ECO Level, the higher the number of leaves.
z
The ECO Level is updated about once 1 hour.
(If there is no change in the ECO Level, the number of leaves does not change.)
z
Initially (at the time of purchase), one leaf is displayed.
z
ECO GUIDE is displayed even when ECO mode is not set.
z
After a (refrigerator, freezer or ice making compartment) door is closed, the
ECO GUIDE and ECO mode displays light up for about 30 seconds. Then,
they go off.
* When the level is 0, one leaf blinks slowly.
1
Press for about 3 seconds.
(Until the buzzer sounds twice.)
lights up.
Power Saving
(ECO MODE, GUIDE)
Setting ECO MODE
About the GUIDE