Filter
Top Products
25
TroubleshootingBefore Use Operation Cleaning
Note
z
Wash the water tank, water supply pipe and ice tray before making ice for the fi rst time, or
if you have not made ice for more than a week. Odors or dust may be adhered to the parts.
Note
z
When carrying the water tank, hold the tank with both hands.
(If you hold the lid, the tank may fall and cause an injury.)
Ice storage
box
Empty the ice tray and water tank.
Water tank
Water tank
Return the water tank to its original position
Return the water tank to its
original position
3
Remove the water tank.
1
Set the ice making setting of the
ice making compartment to
.
Page 13
2
Remove the water tank and
empty the water.
3
Remove the ice tray and empty
the water and ice.
z
For details on removal, see the page that
describes the cleaning methods.
Page 26
4
Remove the ice
storage box and empty
the water and ice.
z
Do not dispose of the
soundproof mat.
5
Wash the water tank
(water supply pump,
pipe, optical catalyst and lead-cleaning fi lter)
,
water supply pipe, ice storage box,
soundproof mat, ice tray and ice server,
dry them completely, and then return
them to their original positions.
Page 27
z
If the water tank is not
returned to its original
position, the food
inside the refrigerator
compartment may freeze.
5
Close the water tank cap, and while holding
the water tank horizontally, push it in until
it makes contact with the inner side.
z
If there is a gap between the water tank and the water
supply pipe, the water tank may freeze.
Check that there are no foreign objects between the tank
holder and the water supply pipe area.
Page 26
z
Push in the water tank until it makes contact with the
inner side. Setting
the water tank incorrectly may
prevent ice from forming.
4
Slide the water tank cap
and pour water into the
water supply port up to the
full position.
z
If water is fi lled beyond the full position,
water may spill when you carry or tilt
the tank. Further, it may cause the water channels in the ice
tray to freeze, or the ice to join together or form a protrusion.
WARNING-Fill with potable water only.
2
Make sure that
on the
control panel is not on.
z
If the lamp is on, insert the ice tray and lock
the ice tray lock lever.
Page 26
1
Press on the control
panel and select
or .
Page 13
Making ice
Stopping ice making
(When not using for a long time)
Full position
Water supply port