Filter
Top Products
26
TroubleshootingBefore Use Operation Cleaning
Water supply pipe
Tank holder
Water supply pipe
Tank holder
Packing
Aluminum
pipe
Water supply pipe
Tank
packing
Keep horizontally
Do not
trap foreign
objects
Ice tray lock
lever is locked
Ice tray lock
lever is released
Clean the ice maker periodically to ensure that the ice is pure and delicious.
•
Do not rinse the tank holder with water.
Doing so may cause a malfunction.
• I
f the water supply pipe is not
installed, the food inside the
refrigerator compartment may freeze.
• Rotate and remove the aluminum pipe.
* White minerals or chlorine
accumulation may be adhered to the
parts, but this is not abnormal. Wash
off such substances and reuse the
parts.
• When the ice tray lock lever is
unlocked the
display turns on.
• There is a risk of the water spilling.
Pull out the tray slowly.
• After washing the tray, dry off any moisture.
• The ice tray is operating while
is blinking.
Close the door and wait until the blinking fi nishes.
• The door alarm sounds if the door is opened while the ice
tray is operating.
• Check that
is off.
If the lamp is on, check the position of the ice tray lock lever.
•
Push in the water supply pipe fi rmly
so that there is no unevenness. Using
while unevenly set may cause a
malfunction.
• If the parts are not inserted fi rmly
or there are gaps due to foreign
objects, it may cause abnormal
noise or prevent ice from forming.
It may also cause the water in
the water tank or food in the
refrigerator compartment to freeze.
* If mold forms easily because of the type of water,
clean about 2 or 3 times a week.
When using bleach to clean the water tank and
lid, follow the product instructions.
* Do not use a dishwashing machine, because it may deform the parts.
Prevents formation of water scale and mold.
Align the mark on the
water tank cap with
the mark on the lid,
and remove it.
Mark
Cleaning the Automatic
Ice Maker
Ice tray
Water tank
Water supply pipe and tank holder
1
Remove the lid and wash it.
(Upper temperature limit about 60°C)
1
Pull out the water supply pipe
and wipe the tank holder with
a clean cloth.
1
Press to select .
Page 13
2
Disassemble and wash the parts.
2
Open the door of the ice making
compartment and unlock the ice
tray lock lever.
3
Pull the ice tray towards
the front and then remove it.
5
Push in the ice tray until it makes
a clicking sound, and then lock
the ice tray lock lever.
6
Press to select the ice
making setting.
4
Empty the ice tray and wash it.
3
Follow the procedure
in reverse to return
the parts to their
original positions.
4
Check that there are no foreign objects
between the water supply pipe and the
tank packing or tank holder.
month
once a
year
1~2 times
a
week
once a