Filter
Top Products
10
Switching on
When you switch on the unit a screen
similar to the one shown here will appear
briefly. This indicates the software version
and block type installed in the unit.
When the initial screen has disappeared
the screen shown here will automatically
appear. There are three options:
1. ‘Programs’ for creating and running
programs;
2. ‘Information’ for obtaining information
about the unit e.g. serial number;
3. ‘Configuration’ for setting up program
defaults and settings.
Each of these is explained in detail in
section 6.
TC
3000
Version X.XX
Block 25x0.2ml
or 30x0.5ml
TCY
Version X.XX
Block Type 48x0.2ml
Omega Engineering
Programs [0]
Information
Configuration
[ , to select ]
Methods [0]
Information
Configuration
[ , to select
]