Filter
Top Products
17
To edit a field or step in an existing
program
When the unit is switched on the display
will show this screen.
If known, type in the ‘Speed dial’ number
for the required program and press
“Enter” This will take you directly to
the required program.
If you do not know the ‘Speed dial’
number, press “Enter” to access the
list of stored programs.
Either:
1. Scroll to the required program using
the “Up Arrow” or “Down Arrow” keys
or
2. Type the first letter of the program
name in the ‘New program’ field; this
will then list all the program names
beginning with that letter. Use the “Up
Arrow” or “Down Arrow” keys to
select the required program.
Press “Enter” to accept
The full set of options for a program is
shown here; these are shown on the LCD
screen three lines at a time.
Use the “Down Arrow” and/or the “Up
Arrow” keys to
select the option you require.
Press the “Enter” key to select the
option.
Edit a selected field or step
Select ‘Edit program’ and a screen similar
to this will appear.
Use the “Down arrow” and/or the “Up
arrow” keys to select the field or
step you want to edit.
You can now edit the active field or step
by first pressing the “Enter” key
Programs [0]
Information
Configuration
[ , to select ]
Methods [0]
Information
Configuration
[ , to select ]
DONNA [7]
Run program
View program
Edit program
Copy program
Delete program
Set password
[ , to select ]
DONNA [7]
Run method
View method
Edit method
Copy method
Delete method
Set password
[ , to select ]
DONNA [7]
Set password
[ , to select ]