Filter
Top Products
31
When you have finished, press the “Enter”
key to go back to the ‘Configuration’ menu.
Passwords
The ‘Passwords’ function allows the
administrator to change the ‘Admin
password’ (which allows access to
Configuration) and also to delete any
passwords associated with programs.
Highlight ‘Passwords’ then press “Enter”
The screen will appear as opposite.
We suggest that you change the ‘Admin
password’ at this stage in order to protect
the configuration settings.
Use the “Up Arrow” key to highlight
‘Admin passwd’
Press “Enter” and type in the new
password. Repeat to confirm and accept.
The screen will go back to the
‘Configuration’ menu.
To delete a password associated with a
program, use the “Up Arrow” and “Down
Arrow” keys to highlight the
program.
Press “Enter”
Press “Enter” again to delete the
password.
Controller reset
The ‘Format memory’ will delete all saved
programs from the unit.
Highlight ‘Format memory’ then press
“Enter”
To delete all the programs, press “Enter”
Set ADMIN PASSWORD to 1234.
Program defaults
Settings
Passwords
Controller reset
Format memory
Passwords
Self-calibrate
Settings
Program defaults
Settings
Passwords
Controller reset
Settings
Passwords
Format memory
Self-calibrate
CONTROLLER RESET
This will delete
all programs
[ SURE ? ]
[ YES NO ]
Format Memory
This will delete
all methods
[ SURE ? ]
[ YES NO ]