Filter
Top Products
25
The prompt line will change to flash
between ‘CHANGE STEP?’ and ‘YES’ or
‘NO’.
Press “Enter”
The cursor will again move into the edit
mode.
Now press the “Up Arrow” key
The step will change to ‘fst’, meaning
“first”, and the software will insert another
line after it entitled ‘lst’, meaning “last”.
Press “Enter” twice to go into edit
mode.
Use the “Alpha/numeric” keys to change
the values of the ‘fst’ line to the first
temperatures and/or times you require.
Press “Enter” after each field you
change.
You will exit ‘Edit Mode’ when you reach
the end of the line.
Use the “Down Arrow” key to move
onto the ‘lst’ line.
Press “Enter” to edit the step.
Use the “Alpha/numeric” keys to change
the values of the ‘1st’ line to the final
temperatures and/or times you require.
Press “Enter” for each field you
change.
You will exit ‘Edit Mode’ when you reach
the end of the line.
When you run the program it will
automatically increment or decrement in
equal steps from the first time and/or
temperature to the last over the number of
cycles in the stage. For example: if the