Filter
Top Products
29
Program Information
Pressing “Enter” while a program is
running will give information about the
current run including which program is
actually running and the unit status e.g.
holding or ramping.
An example is shown here.
7. Information
The Information field on the front screen
contains all the unit-specific information
such as serial number and software
version.
Press “Enter” to access the unit
information.
The complete list is displayed here.
8. Configuration
Warning! The Configuration software should only be accessed by designated personnel, as some
parameters can be changed or may be lost when using it.
The Configuration field on the front screen
allows a system administrator access to
set up all the default settings for the
programs, time and date settings and to
change and remove passwords.
Programs [0]
Information
Configuration
[ , to select ]
Methods [0]
Information
Configuration
[ , to select ]
Block 20x0.5ml
Block s/n
139160
-
2
Unit s/n
GP0000
-
0
1
S/w version 14.zz
H/w version 01
Comms
address 1
Unit cycles 624
Block cycles 69
Block Type: 48x0.
2
m
l
Block id
123456789
Unit s/n C3C123456
S/w version 6
.
zz
H/w version 2.ZZ
Comms
address 1
Unit cycles 624
Block cycles 69