Filter
Top Products
7
3. Cycler TCY Specification
Temperature
Temperature range 4°C to 99°C
Temperature set point precision 0.1°C
Block uniformity (over full range) ± 0.5°C
Temperature accuracy ± 0.5°C
End of program cooling below ambient Yes
Heating/Cooling Rate
Maximum heating rate 4.5ºC/s
Minimum heating rate 0.1ºC/s
Maximum cooling rate 3.0ºC/s
Minimum cooling rate 0.1ºC/s
Heated Lid
Heated lid enable/disable Yes
Selectable heated lid temperature 100°C to 115°C
Over-temperature cut-out Fixed at 145°C
Temperature sensor Thermistor
Heater type Etched foil
Heater power 33W
Warm up time 4 min approximately
(ambient to 105°C)
The heated lid will only come on if the set temperature is above 35°C
Programming
Program naming using alpha keys Yes
Program password protection Yes
Number of programs (3 step) 37
Maximum number of steps per stage 35
Maximum number of stages per program 25
Minimum hold time 1 sec
Maximum hold time 18 hrs
Incremental/decremental temperature Yes
Incremental/decremental step hold time Yes
Programmable ramp rate (heat or cool) Variable in 0.1°C/sec steps
Programmable ramp rate resolution 0.1°C
Running Programs
Pause button Yes
Stop button Yes
End of program alarm Yes
Auto restart on power fail Yes
Interconnectivity
Connection to PC control program Yes
Software updates from web-site Yes