Filter
Top Products
8
1. Remove all packaging, plastic, paper and
cardboard from the unit.
2. The LCD screen (timer panel) has an
electrostatic sticker on the screen. This is
part of the packaging. Please remove prior
to use.
3. Ensure the power is switched off at the
power outlet, and remove the power cord
from the unit.
4. Remove the safety locking lid by turning
clockwise to unlock. Remove the sealing
gasket from the lid and wash the gasket
and the lid in warm soapy water. Dry the
sealing gasket and lid thoroughly before
reattaching the sealing gasket to the lid.
See figure below. Ensure the sealing gasket
is smoothly and securely in place in the
gasket holder. If the sealing gasket is not in
the correct position the lid will not be able
to form a seal and will not be able to gain
pressure.
5. Remove the cooking pan and the
condensation collector and wash in warm,
soapy water. Dry thoroughly before
replacing back in the unit.
Before the first use
Press downward
Install
Pull upward
Remove