Filter
Top Products
Figure 2. Clearing the steam release
valve cover.
Pull upward
Remove
Press downward
Install
25
Pressure and Steam Release Valve
Ensure the pressure and steam release valve
is clear from debris before you commence
using the unit. Remove the valve and gently
clean. Ensure it is completely dry before
replacing.
Steam Release Valve Cover
The steam release valve cover is on the
underside of the lid. Ensure it is clear from
debris before you commence using the unit.
Gently hand clean the cover using warm,
soapy water. Do not try to remove the valve
cover, just gently lift it up and down to clear
debris. Ensure it is completely dry before
returning it to your unit.
Lid Lock Valve
Gently lift the valve and ensure it is clear
from debris before you commence using the
unit.
Note: Condensation may collect inside the
unit under the removable cooking pan. This is
normal. Wait and until cool, and then remove
using paper towelling or kitchen cloth.
Note: Always make sure that each component
(pan, valves, gasket) is completely dry before
you put them back into your unit.
Care and Cleaning continued