Taylor 632 Freezer User Manual


 
22
Operat ing Procedu res
Model 632
Step 4
Place the power switch in the ON position.
Figure 31
Step 5
Press the WASH key. This will cause the sanit izing
solution in the freez ing cylinder to agitate. Allow it to
agitate fo r five minut es.
Figure 32
Step 6
Place an empty pail beneath the door spout. Raisethe
primeplug(softservesideonly).
Figure 33
Step 7
When a steady stream of sanit izing solution is fl owing
from the prime plug opening in the bottom of the
freezer door, open the draw handle. Draw off all the
sanitizing solution.
Figure 34
Step 8
Once the sanit izer st ops flowing from the door spout,
close the draw handle and press the WASH key,
cancelling the beater motor operation.
Note: Yo u have just saniti zed the freezer . Be sure
your hands are sanitized before continuing these
instructions.
Step 9
Stand the air tube in the corner of the hopper.
Figure 35
Repeat steps 1 through 9 for the shake side of the
freezer .