Filter
Top Products
Thermador®
RDF, REF 30 inch Range error codes
Error Codes
F1
Causes
Stuck buttons
Stuck latch switch
Example
Button is jammed
Lock & unlock switches
Corrective Action
Unstuck buttons
Replace latch
F3 Sensor problem Open or shorted sensor
Check sensor
See note 1
If the error codes persist after eliminating all possible causes, replace the ERC3
Note 1 Oven sensors should measure 1050
ohms at 75 degrees F. if the sensor
measures correctly (within 10%),
check each leg of the sensor to
ground and to each phase of the
electrical supply. If all checks OK,
check the contacts inside the molex
plug. If the spring contacts are
bent or crushed, the sensor will
create intermittent errors.
18