Filter
Top Products
B
FAULTS NOT DETECTED BY THE CONTROL
Problem Possible Solutions
Meat probe icon appears on the
display even if the probe is not
plugged in.
1. Check P2 connector on the Display Board and the wires.
2. Check the connection terminals on the socket mounted on the cavity
left sidewall. They may be shorted or have a loose contact (for
example, through the aluminum foil around the insulating material).
Lock symbol is always displayed.
1. Check the latch and door switches and their connections.
2. Check if any shorts on P4 (for upper or single oven) or P24 (for lower
oven) connector pins.
3. If everything is OK, try to replace the Power Board.
Some of the keys are not working.
No beeps when touched and
expected action not executed.
1. Check the connection cable between the Display Board and the
Keyboard.
2. If OK, replace the Keyboard.
Buzzer Never beeps.
Replace Display Board.
39