Filter
Top Products
B
Range Error Codes – Additional Information
CODE DESCRIPTION
WHEN CHECKED
F1
Meat probe not there or incorrect
During Test / use
F2
Oven sensor not correct
During Test / use
F3
Warming sensor not correct
During Test / use
DOOR
LATCH
ERROR
Door latch problem
During self-clean
ERROR
Temp. reaches 585 degrees F. Display shows “CONTACT
SERVICE” and beeps. The beep can be stopped with
touching cancel zone, but display will stay up with
program locked until main power is removed for a
minimum of 5 seconds. If the temperature continues to rise
(due to stuck relay) the latch will lock at 600 degrees F
During any cooking mode
Note: Depending on model, program will only look for probes or sensors that it should have.