Filter
Top Products
B
WFL 2060 Washer Fault Codes
Fault Possible Causes Flashing
Lights
Program fault
Occurred
Door open or
won’t lock
Door left open.
Faulty door latch or door lock
○ Door locked
○ Rinse/Spin
● Wash
Wash
No water filling
Water shut off.
Inlet strainer filters blocked.
Water pressure too low (<1 bar)
○ Door locked
● Rinse/Spin
○ Wash
Wash
No heating
Fault heater.
Voltage too low.
Excessive scale on heating element.
○ Door locked
● Rinse/Spin
● Wash
Test
No draining
Blocked sensor.
Faulty water level controlled.
Faulty or blocked drain pump.
● Door locked
○ Rinse/Spin
○ Wash
Wash
Motor won’t run
Faulty speed control.
Triac short-circuited.
Faulty reversing relay.
○ Door locked
● Rinse/Spin
○ Wash
Test
Overheating
Faulty control module.
● Door locked
● Rinse/Spin
○ Wash
Test
NTC failed (short
or open circuited)
Faulty wire harness.
Faulty NTC.
● Door locked
● Rinse/Spin
● Wash
Test
46