Filter
Top Products
B
WFK 2401 Washer Fault Codes
Fault
Code
Faults Possible Causes/Notes Corrective Actions
05 Drum motor
erratic
• Motor drive circuit (Triac) has failed.
• Drum drive motor has failed.
• Reserving relays have failed.
NOTE: Fault code occurs during test program.
• Check voltage at motor connectors when motor is energized. If low or
no voltage, replace faulty control module.
• Check voltage at motor connectors when motor is energized. If ~240V,
replace faulty drum motor.
• Check voltage at motor connectors when motor is energized. If voltage
doesn’t reverse, replace faulty control module.
06 Door open or
won’t lock
• Door isn’t closed properly.
• Door latch is broken.
• Door lock is faulty.
NOTE:
Fault code occurs during customer use
or test program.
• Close door securely. If door won’t latch, check door latch and door
hinge alignment.
• Replace broken door latch.
• Measure resistance of door lock mechanism (~ 300 – 1350 Ω). Replace
faulty door lock mechanism.
08 Drum motor
won’t run
• Drum rear bearing has failed.
• Motor drive circuit (Triac) has failed.
• Drum drive motor has failed.
• Reserving relays have failed.
NOTE: Fault code occurs during test program.
• Check how drum rotates. If drum wobbles or won’t move, replace faulty
rear bearing.
• Check voltage at motor connectors when motor is energized. If low or
no voltage, replace faulty control module.
• Check voltage at motor connectors when motor is energized. If ~ 240V,
replace faulty drum motor.
• Check voltage at motor connectors when motor is energized. If voltage
doesn’t reverse, replace faulty control module.
44