Filter
Top Products
B
B
Dishwasher Error codes
Error codes that the consumer will see on models with numeric display:
F Indicates a water level or filing error. Underfill, overfill or water in the base. See note 1
2H Indicates that the last wash cycle took over 99 minutes to complete.
Usually indicates inlet water too cold, or heating fault in the dishwasher. See note 1 & 2
Error codes only displayed in diagnostic program: See note 3
Models with numeric display:
0 No faults
1 Aqua Sensor “Sensotronic” fault
2 Heating fault
4 Filling fault
8 NTC (temperature sensor) fault
Models without numeric display:
LED’s on the buttons will be lit to indicate faults.
Please refer to B/S/H Dishwasher Troubleshooting Tips or
Major Appliances Technical Manual for specific model / code information.
49