Villaware FPVLFPSL01 Food Processor User Manual


  Open as PDF
of 80
 
5
instructions for use
BEFOREUSINGYOURFOODPROCESSOR
Follow the assembling instructions listed below before using your Villaware™ Food Processor:
BE SURE THAT THE ELECTRIC CORD IS UNPLUGGED.
THE BLADES AND DISCS ARE EXTREMELY SHARP. USE CAUTION WHEN
HANDLING THEM.
•Beforeassemblingyour
food processor
, make
sure it is unplugged and
placed on a dry , level
surface. Place the bowl,
without the cover , over
the drive shaft on the
motorbase.(Figure1)
•Ifyouaregoingtouse
one of the discs, place
the attachment rod over
thedriveshaft(gure
4a).Thenplacethedisc
on top of the attachment
rod with the desired
sidefacingup(slicing,
shreddingorgrating)
(gure4b).
•Attachthecoveronto
the bowl so that the
food chute is in front
of the bowl above the
switchcontrol(Figure5).
Turn counter clockwise
until the arrow on the
cover is aligned with the
locked symbol on the lid
“ ”.
•Rotatethebowluntilit
fits evenly on the base.
Holdhandleandturnthe
bowl counter clockwise
until it locks firmly into
place(Figure2).The
handle will be facing
forward and aligned with
the switch control. Make
sure the arrow on the
base is aligned with the
locked symbol “ ”.
•
If you are going to use
thechoppingblade;place
it over the drive shaft,
rotating it slightly until it
dropsintoplace(Figure3).
THE BLADES AND
DISCS ARE SHARP.
USE CAUTION WHEN
HANDLING THEM.
Figure 4a
Figure 1
Figure 2 Figure 3
Figure 5 Figure 6
•Pushdownonfood
pusher lid until it clicks,
indicating that the cover
is locked into place.
Figure 4b
NOTE:Eachtimeyoure-assembleyourfoodprocessor,besuretoattachthebowlrst
and lock it into position . Then attach the cover.
 previous next