Villaware FPVLFPSL01 Food Processor User Manual


 
7
after using your food processor
Before cleaning and storing your food processor , follow the instructions below to
disassemble the unit:
•Turnfoodprocessoroff“”andunplugitfromtheelectricaloutlet.
•Releasefoodchutelidbypressingoutwardonthelatch.
•Turnclockwisetoremovethecover.
•Removeprocessingaccessoryyouwereusingholdingitbytheshaft.Donottouchblades
or sharp edges when emptying the bowl or removing accessories.
•Rotatethebowltothelefttoreleaseandthenliftuptoremoveitfromthebase.
cleaning
THE BLADES AND DISCS ARE EXTREMELY SHARP. USE CAUTION
WHEN HANDLING THEM DURING CLEANING.
•Turnfoodprocessoroff“”andunplugitfromtheelectricaloutlet.
•Disassembleallremovablepartsofthefoodprocessor.Thechoppingblade,discsand
attachmentrodaredishwashersafe;selecttheminimumtemperatureandplaceonthe
top shelf. Wash the other pieces by hand with warm, soapy water . If the residues dry
out in the chopping blade, discs, bowl or the cover , let it soak in warm, soapy water for
approximately 10 minutes before washing it.
•Wipethemotorbase,includingthedriveshaft,withadampordrycloth.
•Donotimmersethemotorbaseinwateroranyotherliquid.
•Useapieceofkitchenpaperwithalittlevegetableoiltoremovesomeofthestaining
resulting from certain foodstuffs, such as carrots.
•Cleaningtheinternalshaftofyourchoppingbladeismostimportant.Wesuggesttheuse
of a small baby bottle brush to remove any food particles, then wash and dry the shaft
thoroughly.
•Whenhandwashing,avoidsoakingpartsindetergentfortoolong.
•Readthroughthemanufacturer’sinstructionstoverifythatdishwashingdetergentsare
suitable for cleaning plastic items.
RESET FUNCTION:
1. The motor contains a resettable fuse to protect against overheating.
2.Iftheunitstopsaftercontinuoususetheturnthefoodprocessoroff“ ” and unplug it from
the electrical outlet.
3.Waitfor5-10 minutes for the food processor to cool down.
4. Plug the food processor into the electrical outlet and resume normal use.
5. If the food processor does not operate after instructions 1-4,repeattheabovestepsandwait
a further 10 minutes before using again.