Filter
Top Products
Hardware Installation
206380-A
2-3
8.
Connect the RJ-45 connector of a standard Ethernet cable to the RJ-45
port on the media coupler.
Be sure to follow the cable guidelines described in “Cable Requirements
” on
page 1-6.
9.
Connect the other end of the Ethernet cable to a network device, such as
a hub or switch.
10.
Attach a power cord to your laptop. Plug the cord into a power source.
11.
Turn on power to the laptop.
12.
Be sure any connected devices are receiving power.
Removing the BayStack 22 PC Card Adapter
You can easily remove the BayStack 22 network card from your laptop computer,
if needed. Before you remove the network card you must stop the PCMCIA Card
Service.
To remove the BayStack 22 network card:
1.
From the Windows taskbar, choose Start > Settings > Control Panel.
2.
Double-click PC Card (PCMCIA).
3.
Select “Nortel Networks BayStack 22 PCMCIA card.”
4.
Click Stop.
An “It is ok to remove the PCMCIA card” message is displayed.
5.
Firmly grasp the network card and remove it from the computer.
6.
Depress both sides of the 15-slot connector of the media coupler.
7.
Remove the media coupler from the network card.
Warning:
Do not remove the BayStack 22 network card from your laptop
before stopping the PCMCIA Card Service. Your laptop will freeze if you
remove the network card incorrectly.