Filter
Top Products
Software Installation
206380-A
3-23
Installing the Network Driver in a Windows NT 4.0
Environment
This section describes the steps required to install the network driver software in a
Windows NT 4.0 environment.
To install the network driver in a laptop computer:
1.
Be sure that the standard network services are installed on the
Windows NT 4.0 laptop.
2.
From the Windows taskbar, choose Start > Settings > Control Panel.
3.
Double-click Network.
The Network dialog box opens. The Identification tab is displayed by default.
4.
Select the Adapters tab (Figure 3-28).
Figure 3-28. Network Dialog Box—Adapters Tab