Filter
Top Products
Software Installation
206380-A
3-19
3.
Select Nortel BayStack 22 10/100 Mbps Fast Ethernet Adapter.
4.
Click Properties.
The BayStack 22 network driver dialog box opens (Figure 3-24
).
Figure 3-24. BayStack 22 Network Driver Dialog Box—Advanced Tab
5.
Select the Advanced tab.
6.
In the Property list, select Connection Type.
7.
In the Value list, select one of the following:
• AutoSense—Select the default AutoSense setting if you want the port to
use the fastest speed supported by the attached device.
• 10BaseT (Twisted Pair)—Use this setting for 10 Mb/s Ethernet hubs.
• 100BaseTx—Use this setting for 100 Mb/s Ethernet hubs.
• 100BaseTx or 10BaseT full duplex—Use these settings for 100 Mb/s and
10 Mb/s Ethernet switches.