Filter
Top Products
Installation and Reference for the BayStack 22 PC Card Adapter
B-6
206380-A
NWAY Parameter
The NWAY parameter specifies the connection type as auto-negotiation, which is
also the default connection type.
S10/S10FD/S100/S100FD Parameters
The S10, S10FD, S100, and S100FD parameters specify the connection type of
the BayStack 22 network card. The connection type includes transmission speed
(10 or 100 Mb/s) and full- or half-duplex operation. These parameters are
mutually exclusive; you can select only one parameter at a time from the
command line. If you do not select any of these parameters, the default connection
type is autonegotiation (NWAY). Table B-4 describes each parameter.
Table B-4. Client Connection Type Parameters
Parameter Connection Type
S10 10 Mb/s, half-duplex
S10FD 10 Mb/s, full-duplex
S100 100 Mb/s, half-duplex
S100FD 100 Mb/s, full-duplex