Filter
Top Products
Software Installation
206380-A
3-7
3.
Select Properties.
The Properties dialog box opens. The Advanced tab is displayed by default
(Figure 3-8
).
Figure 3-8. Properties Dialog Box
4.
In the Property list, select Connection Type.
The AutoSense value is displayed by default.
5.
In the Value list, select from the following connection speed types:
• AutoSense (Use this setting if you want the RJ-45 port on the media
coupler to use the fastest speed supported by the attached device.)
• 100BASE-TX for 100 Mb/s connections
• 100BASE-TX or 10BASE-T full-duplex mode, for 10 and 100 Mb/s
switch connections
• 10BASE-T twisted pair for 10 Mb/s connections