Filter
Top Products
Novell NetWare Reference Information
206380-A
B-5
NET.CFG
Files and Parameters
This section contains a sample NET.CFG file and describes the parameters of this
file.
Sample
NET.CFG
File
You can specify the DOC ODI driver in the NET.CFG file. The following is a
sample NET.CFG file:
Protocol
Bind B22ODI10
LINK DRIVER B22ODI10
Port 300
IRQ 5
; NWAY
; S10
; S10FD
; S100
; S100FD
NetWare DOS Requester
FIRST NETWORK DRIVE = F
NETWARE PROTOCOL = NDS BIND
NET.CFG
File Parameters
This section describes the NET.CFG file parameters PORT, IRQ, NWAY, and
S10/S10FD/S100/S100FD.
PORT Parameter
The PORT parameter specifies the input/output (I/O) address in hexadecimal
format. This value must match the value reported by the B22ENA10.EXE
program. The default value is 300.
IRQ Parameter
This parameter specifies the interrupt (IRQ) value for the BayStack 22 network
card. This value must match the value reported by the B22ENA10.EXE program.
The default value is 5.