Filter
Top Products
Software Installation
206380-A
3-27
Configuring the Windows NT Environment
This section provides instructions for configuring the BayStack 22 network card
on the network after you have installed the BayStack 22 network driver on a
Windows NT laptop computer.
To configure the network properties for your Windows NT laptop:
1.
From the Windows taskbar, choose Start > Settings > Control Panel.
2.
Double-click Network.
The Identification tab is displayed by default.
3.
Select the Bindings tab (Figure 3-33).
Figure 3-33. Bindings Tab
The all services selection is the default.