Filter
Top Products
Software Installation
206380-A
3-11
22.
Use the Gateway or DNS Configuration tabs to configure other
parameters, as needed.
23.
Click OK.
The Copying Files dialog box is displayed.
24.
In the “Copy files from:” field, enter the location of the requested files or
CD.
25.
Click OK.
The system restart dialog box opens. Restarting your system is necessary to
enable your PC to finish setting up your new hardware.
26.
Remove the CD from the CD drive.
27.
Click Yes.
Your system restarts.
Installing the Network Driver in a Windows 98 Environment
This section describes the steps required to install the driver software in a
Windows 98 environment.
To install the network driver:
1.
Turn on the power to the computer, and start Windows 98.
The New Hardware Found window opens, identifying a generic network card.
For instance, the window may list “PCMCIA Ethernet Adapter, or PCMCIA
Ethernet Controller” (Figure 3-13
).
Figure 3-13. New Hardware Found Window—Generic
New Hardware Found
PCMCIA Ethernet PCMCIA Adapter
Select which driver you want to install for your new hardware:
9561DA