A SERVICE OF

logo

Software Installation
206380-A
3-21
Configuring the Interrupt Request
You can configure the Interrupt Request (IRQ) parameters. Nortel Networks
recommends configuring the IRQ only if you are an expert at network or
PC configuration.
To configure the IRQ:
1.
From the Windows taskbar, choose Start > Settings > Control Panel.
2.
Double-click System.
3.
Select the Resources tab (Figure 3-26).
Figure 3-26. Resources Tab
4.
Clear the “Use automatic settings” box.
5.
In the Resource type list, select Interrupt Request.