Filter
Top Products
Installation and Reference for the BayStack 22 PC Card Adapter
B-4
206380-A
S10, S10FD, S100, S100FD Parameters
The S10, S10FD, S100, S100FD parameters specify the connection type of the
BayStack 22 network card. The connection type includes transmission speed
(10 or 100 Mb/s) and full- or half-duplex operation. These parameters are
mutually exclusive; you can select only one parameter at a time from the
command line. If you do not select any of these parameters, the default connection
type is autonegotiation. Table B-2
describes each parameter.
The following is an example of a connection type parameter set to 10 Mb/s
transmission speed and full-duplex mode:
LOAD B22LAN10 INT=3 PORT=300 FRAME=ETHERNET_802.2 S10FD
Novell NetWare Client Files
This section provides information about client and NET.CFG files.
Client Files
Table B-3 briefly describes the files you use when installing the BayStack 22
network driver into your Novell NetWare client.
Table B-2. Server Connection Type Parameters
Parameter Connection Type
S10 10 Mb/s, half-duplex
S10FD 10 Mb/s, full-duplex
S100 100 Mb/s, half-duplex
S100FD 100 Mb/s, full-duplex
Table B-3. Client Files
Command Description
LSL.COM Supports the OSI link support layer
B22ODI10.COM Client BayStack 22 network driver
file
IPXODI.COM Default protocol stack
NETX.EXE Server connection
NET.CFG Optional configuration file