Filter
Top Products
13
Getting Started
For more information on using printers with your iCEBOX, visit
support.iceboxllc.com.
External Speakers
You can route sound through a home stereo or other amplified audio sys-
tem. Connect your system to the Audio Out connections on the rear panel
of the unit (See Figure 5). For more information, refer to the instructions
that were provided with your audio system.
Connecting the
SANI Antenna
If you own any Beyond Connected Appliances, you can use your iCEBOX
CounterTop as the primary information gateway in lieu of a Beyond Home
Hub.
The CounterTop and Connected Appliances communicate via RF (Radio
Frequency) using the SANI antenna included with the CounterTop. SANI
stands for Salton Appliance Network Interface, the technology used to
connect the CounterTop and Appliances.
To connect the SANI antenna
• Plug the SANI antenna into the SANI connector on the rear panel of the
iCEBOX.
See Video Mode on page 41 for more information about configuring con-
nected appliances.
Connecting the
Power
The iCEBOX operates with a current of 110 V AC, 60Hz. A 110 V AC
power cord is supplied with your iCEBOX.
To connect the power
1. Ensure that the power switch on the back panel is in the off position
(“O” is depressed).
2. Plug the supplied AC power cord into the AC connector on the rear
panel of the iCEBOX.
3. Plug the other end into a 110 V AC wall socket.
4. Turn the power switch to the on position (“|” is depressed).
• The LED indicator on front panel shines red.