Beyond icebox countertop Ice Maker User Manual


 
CounterTop Owner’s Manual
26
Satellite Television Service
The iCEBOX supports satellite television service; however, when using sat-
ellite service, the iCEBOX remote or keyboard cannot be used to change
channels. Continue to use your existing remote control with the set-top
box.
Your satellite signal may come in through the TV In coaxial connection or
the S-Video jack in the back of the iCEBOX.
To access a signal from the TV In connection
To set a satellite signal source coming in through the TV In coaxial con-
nection, select the Cable option when choosing the Signal Source.
You may also want to remove all the iCEBOX channels except 3 or 4 (if
needed) to prevent the Channel +/- buttons from having any effect.
Use your existing remote control with the set-top box to change
channels.
To access a signal from the S-Video connection.
To access a satellite (or Digital Cable) signal coming through the
S-Video jacks, switch to Video mode to watch television.
Press the Video mode button repeatedly to toggle between the RCA
and S-Video video signals.
Use your existing remote control with the set-top box to change
channels.
Autoscan for
Te l ev i s io n
Channels
The Autoscan Channels feature allows you to easily configure the iCEBOX
to show only the television channels that are available in your area.
Note: Do not perform Autoscan if your iCEBOX is not connected to a
television signal source.
To Autoscan for Television Channels
1. If not already in Television Mode, press Television.
2. Press Options. The Television Options menu is displayed (See
Figure 13).
3. Select Autoscan Channels.
4. Choose OK.
The iCEBOX automatically scans for television channels available in
your area. This may take a few moments. When the scan is com-
plete, the TV tunes to the first available channel.