Breadman TR2700 Bread Maker User Manual


 
27
9th press: Bake cycle
10th press: Keep Warm cycle
11th press: Temperature
12th press: Extras – Do you want to activate the fruit and nut dispenser?
YES or NO
Note: To skip a cycle, press the arrows until you reach zero (0), then press
PROG to move on to the next cycle of the baking program.
3. Press PROG a final time. The word SAVE will flash on the display.
4. Select YES or NO. Selecting YES will save your changes. If you select NO,
the personal recipe course will proceed as programmed, but will revert back
to the previously saved times at the end of baking.
Note: You can use the Delay Bake Timer when running personal recipe
programs. Simply use the / arrows to set the time difference and press
START.
CUSTOM PROGRAMS
The most versatile function on your bread maker, Custom Program is similar to
Personal Recipe in that you can manually change the length of each cycle of a
bread making course. Unlike Personal Recipe, Custom Program factors in LOAF
SIZE and CRUST COLOR.
Note: You can also use Custom Program to change kneading and bake times in
BatterBreadsCourse;heatandstirtimesinJamCourse;kneadandrisetimes
in Dough Course.
To manually change a preprogrammed Course, follow these steps:
1. Press MENU until you reach desired Course setting, such as White.
2. Press PROG; a beep will sound and “CUSTOM PROGRAM” will appear on
the display in the upper left corner.
3. Following the instructions in PERSONAL RECIPES, enter or change cycle
times as outlined. Use KNEADING AND BAKING CHART as a reference.
4. When you are finished, a final beep will sound, indicating your Custom
Program changes have been made.
To reset a preprogrammed Course to its original times, follow these steps:
1. Press MENU until you reach the Custom Program Course setting you wish to
change. It will be displayed in the display window.
2. Press SAVE/ERASE.
3. Display will prompt ERASE, and you may simply press YES to accept and
return to the default setttings.