Filter
Top Products
91
1. Plug into 120 V ~ 60 Hz outlet. Refer to power outage instructions.
2 - 3. Open Lid, remove Bread Pan and allow to cool or warm up.
4. Needs service.
5. Wait until Course is complete; unplug, allow to cool and clean.
6. Only open Lid during kneading process to check dough ball or to add ingredients.
7. Remove bread as soon as Course is done and place on wire rack.
8. Allow to cool approximately 15 to 30 minutes.
9. Courses begin with preheat. No movement occurs in the Bread Pan.
10. Put Kneading Paddle on the shaft of Bread Pan.
11 - 14. Check the dough ball at beep.
It should be round, smooth-textured, soft and slightly tacky to the touch.
(Deluxe Super Rapid dough ball will be sticky to the touch.)
If more like a batter, add 1 TBL flour. Allow to mix; add more if necessary.
If too dry, add 1 tsp water. Allow to absorb; add more if necessary.
15. Follow recipe.
16. Increase by 1/4 tsp.
17. Decrease by 1/4 tsp.
18. Sugar substitutes not recommended.
19. Follow recipe or substitution recommendations.
20. Flours cannot be substituted.
21. Place yeast on top of flour away from liquids.
22. Make sure yeast is fresh and at room temperature.
23. For all Courses, except Deluxe Super Rapid, use active dry/rapid or quick rise in
equal amounts. Follow bread machine yeast directions.
24. Water should be 80°F/27°C for all Courses except Deluxe Super Rapid which should
be 100º-115ºF/43º-46ºC.
SUGGESTIONS
The following suggestions have a corresponding number found on the checklist.
Be sure to read both.
TR900S_OM 9/2/03 4:31 PM Page 94