Filter
Top Products
12
PAGE HEADER.....ASSEMBLING THE JUICE EXTRACTOR
5. Raise the Safety Locking Arm and lock
into the two grooves on either side of the
Juicer Cover. The Safety Locking Arm
should now be in a vertical position.
6.
Slide the Food Pusher down the Feed
Chute by aligning the groove in the
Food Pusher with the small protrusion
on the inside top of the Feed Chute.
7. Place the Pulp Container into position
by tilting slightly.
TIP
To minimize clean up, place a plastic
freezer bag (or plastic grocery bag)
into the Pulp Container to collect
the pulp.
8.
Place the provided Juice Jug under
the spout on the right hand side.
Ensure the Juice Jug Lid is used to
avoid any splatter.
NOTE
A glass could also be used to
collect juice.