Filter
Top Products
25
JUICE EXTRACTOR TROUBLESHOOTING
PROBLEM EASY SOLUTION
Very wet pulp and reduced
juice extraction
• Juice with a slower juicing action by pushing the
Food Pusher down more slowly.
• Stop the juicing process and remove the power
cord from the wall outlet. Use the provided nylon
brush to thoroughly clean the fine mesh holes of the
Filter Basket. Brush the inside of the Filter Basket
under running water, holding it up towards a light
to ensure the fine mesh holes are not blocked. If
the holes are blocked, soak the Filter Basket in hot
water with 10% lemon juice to loosen the blocked
holes. Alternatively, wash the Filter Basket in the
dishwasher. Cleaning the Filter Basket will remove
excess fiber build up (from juicing the fruit or
vegetables) which could be inhibiting the juice flow.
I cannot select the
SMOOTHIE, ICE or
PULSE settings
• These settings can only be selected when the
appliance is assembled as a blender.
Juice leaks between the rim
of the Juicer Cover and the
Filter Bowl Surround
• Juice with a slower juicing action by pushing the
Food Pusher down more slowly.
• Fruit and vegetables with a high water content, for
example tomatoes and watermelon, should be juiced
on low speed.
• Ensure the Juice Extractor is correctly assembled
(see page 12). The rim of the Juicer Cover should be
securely positioned within the Pulp Container and
Filter Bowl Surround.
Juice sprays out too fast
from the Juice Spout
• Juice with a slower juicing action by pushing the
Food Pusher down more slowly.