Filter
Top Products
24
JUICE EXTRACTOR TROUBLESHOOTING
PROBLEM EASY SOLUTION
Motor appears to stall
when juicing
• The Electronic Protection device will automatically
de-activate the motor if the motor is stalled. Unplug
the power cord from the wall outlet and clear the
Feed Chute. Either too much food is being processed
at one time or the pieces are not small enough. Try
trimming food, cutting food into smaller pieces of
even size and/or processing a smaller amount per
batch. Then reconnect the power cord to the wall
outlet and recommence normal use (see page 16).
• Ensure the motor is running before loading the Feed
Chute with food.
• Wet pulp can build up under the Juicer Cover if
the juicing action is too vigorous. Stop the juicing
process and remove the power cord from the wall
outlet. Clean the Juicer Cover, Filter Bowl Surround
and Filter Basket. Reconnect the power cord to the
wall outlet and recommence juicing with a slower
juicing action by pushing the Food Pusher down
more slowly.
• Hard fruits and vegetables will put excess strain
onto the motor if a low speed is selected. Refer to
the speed selector table on page 14 to determine
the recommended speed for the selected fruits and
vegetables.
Excess pulp building up in
the mesh of the Filter Basket
• Stop the juicing process and remove the power
cord from the wall outlet. Clean the Juicer Cover,
Filter Bowl Surround and Filter Basket. Reconnect
the power cord to the wall outlet and recommence
juicing. Try alternating soft and hard fruits and
vegetables, starting with the softer textured
ingredients on low speed then changing to high
speed for harder textured ingredients. This assists in
extracting the maximum amount of juice by clearing
the Filter Basket between ingredients.