Filter
Top Products
34
OPERATING YOUR BREVILLE COMPACT SMART OVEN™ – PIZZA
PIZZA FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
Rack Position
Middle rack height position.
Optional Settings
FROZEN FOODS button.
TEMPERATURE CONVERSION button.
The PIZZA function melts and browns
cheese and toppings, while crisping the
pizza crust.
1. Insert the wire rack into the middle
rack height position. The wire rack
should be positioned with the spokes
facing upwards. Close the oven door.
NOTE
We recommend using the middle
rack height position during the
PIZZA function. However this is a
guide only. The position of the rack
may vary depending on the type and
size of the pizza. Some fresh pizza’s
may be more suited to the bottom
rack height position.
We recommend experimenting with
the rack height position, as well as
the temperature and time settings to
produce the desired results.
NOTE
If cooking a frozen pizza, ensure
to remove all packaging, including
cardboard, plastic, paper, or other
flammable materials before placing
the pizza in the oven.
Breville recommends using a dark
colored, non-stick pizza pan when
cooking a pizza. Light colored pans
reflect heat and may not effectively
crisp the pizza crust.
The optional 12” (30cm) non-stick
pizza pan accessory is available.
For a crisper crust, pizzas can be
cooked directly on the wire rack.
However care should be taken as
melted cheese and other ingredients
may build-up on the heating elements
and create a potential fire risk.
2. Turn the FUNCTION dial until the
indicator reaches the PIZZA function.
The LCD screen indicates the preset
PIZZA temperature of ‘425°F’. The
preset
FROZEN FOODS setting will
also be displayed (see Page 37 if cooking
fresh pizza).
3. The pizza cooking temperature and time
can be adjusted before or during the
cooking cycle.