Filter
Top Products
25
TROUBLESHOOTING
POSSIBLE PROBLEM EASY SOLUTION
Red light flashing
• The Juice Fountain is fitted with a self-resetting safety
device which safeguards against overheating on the
motor with excessive loads. If overheating occurs,
the juicer will automatically activate the overheating
protection device and the motor will switch itself off. If
this occurs, the Overload Protection LED will flash red.
When the overheating protection is activated, allow the
unit to cool for at least 15 minutes prior to continuing
juicing.
• The Juice Fountain will be more prone to overheating
immediately after the overheating protection device has
been activated, light loads are recommended.
• The Juice Fountain will automatically stop operating if
the motor is stalled. This is an electronic safety feature.
Either too much food is being processed at one time
or the pieces are not small enough. Try trimming food,
cutting food into smaller pieces or even size and/or
processing a smaller amount per batch.
• If this occurs, the Overload Protection LED will flash red.
To continue juicing, turn the juicer OFF, unplug from the
power outlet and clear the feed chute. Once the feed
chute has been cleared, plug the power cord into the
power outlet and resume juicing.
JE98XL_IB_Issue1,09.indd 25 16/12/09 11:27 AM