DCS RGTC-305 Range User Manual


 
21
SETTING THE OVEN FOR SELF-CLEAN
1. Push the “CLEAN” Selector Button.
2. Set Oven Control Knob to “CLEAN”.
Cooling Blower turns on
OVEN ON light and HEATING light turn on
LOCK light turns on
The door closing process takes approximately 60 seconds to complete, at
which time the door becomes locked.
AT THE END OF THE CLEAN CYCLE:
The Clean cycle takes 5 hours to complete. The OVEN ON light turns off once the cycle has finished.
1. Push the OFF Selector Button. The door latch will open automatically after the oven temperature falls below
550ºF and the automatic Door Lock completes its 60 sec. cycle to the OPEN position.
2. Turn the Oven Control Knob to OFF (after the oven has cooled). Wipe off white ash residue with a damp cloth or
sponge before replacing oven racks.
3. Replace the oven racks.
WARNING!
The interior of the oven will still be at baking temperatures when the lock light turns off and the oven door can be
opened. Use caution as the Oven may be hot enough to cause burns.
OVEN SELF-CLEANING
Fig.12