Filter
Top Products
Replacing the Cover
When you are ready to replace the computer’s cover, follow
these steps:
1.
2.
Make sure all the internal components are installed properly.
Check all cable connections, especially those that might have
been loosened during your work.
3.
Make sure all cables are out of the way so they do not catch
on the cover.
4.
Slide the cover forward until the front edge of the cover fits
between the front bezel and the computer case. (See the
illustration on page 3-3.)
5.
Replace the six cover retaining screws.
6.
Reconnect
the computer to the monitor, printer, keyboard,
and any other peripheral devices you have. Then reconnect
the power cable to the back of the computer and to an
electrical outlet.
3-4
installing and Removing Options