Filter
Top Products
❑ Usage Sitiati.ns where Appliance
PowerCord~ be DiscomectedMquen*.
Anadapter maybe used only on a 15-arnp
circuit. Do not use an adapter on a 20-amp
circuit. Where local codes permit, a
~wOwY
CONNE~ON may be
madeto a properlygroundedtwo-prongwall
receptaclebythe use ofa ULlistedadapter,
availableatmosthardwarestores.me larger
slotin the adaptermustbe alignedwiththe
largerslotinthe wallreceptacletoprovide
properpolarityin the connectionofthe
powercord.
TEMPORARY METHOD
II2T)
(ADAPTERPLUGSNOT
PERMllTEDINCANADA)
~~11
ALIGNLARGE\ ))~ ~-” ENSUREPROPER
PRONGS/SLOTS
w
GROUNDAND
FIRMCONNECTION
.,,.
BEFOREUSE
CA~ON: Attachingtheadapterground
terminaltothewallr~ceptacle-cov~rscrew
doesnotgroundthe applianceunlesstie cover
screwismetal,andnotinsulated,andthewall
receptacleisgroundedthroughthe house
wiring.Thecustomershouldhavethe circuit
checkedbya qualifiedelectricianto makesure
thereceptacleisproperlygrounded.
men disconnectingthe powercordfromthe
adapter,alwaysholdthe adapterwithonehand.
Ethis is notdone,the adaptergroundterminal
isvery likelytobreakwithrepeateduse. Should
thishappen,DO NOT
USEthe appfianceuntila
proper ground has again been established.
~ ~SW~ SatiationswhereApplia.e Power
Cordti
be Discomected Frquently.
Donot use an adapter plug in these situations
because disconnecting ofthe power cord
places undue stiain on the adapter and leads to
eventualfailure ofthe adapter ground terminal.
The customer should have the two-prong
wallreceptacle replaced with a three-prong
(grounding) receptacle by a qualifiedelectrician
before using the appfiance.
The installationofappliances designed for
mobile home installationmust conform with
the Manufactured Home Construction and
Safety Standard, Title 24 CF~ P~t 3280
(formerly the Federal Standard for Mobile
Home Construction and Safety,Title 24,HUD,
Part 280) or,when such standard is not
applicable,the Standard for Manufactured
Home Installations,latest edition (Manufactured
Home Sites, Communities and Set-Ups),ANSI
A225.1,latest edition, or with localcodes. In
Canada, mobile home installationmust be in
accordance with the current C~/CSA
Z240/MH Mobile Home Installation Code.
Elec?ricOisconttecg
1. Locate disconnect plug on the range back.
2. P~nchsides of connector and pullout of
range back.
Models
EquEppedwith
ModelsEquippedwith
DuaiBurnefi
SealedBurnew
(continuednextpage)
35